Final valve clearance numbers after the shim replacements/shuffle:
Initially I ordered 4 new shims form Z1 Enterprises and rearranged 4 existing shims, but it turned out that Exhaust #1 and Intake #4 were tighter than the assumed 0.02mm since I could only measure 0.03mm and above. Both would still be in spec at 0.04mm, but at the opposite end of the desired clearance range than the other valves.
On Intake #4 I had a shim left over that improved the clearance to 0.09mm, but I had to order one more shim to improve the Exhaust #1 clearance to 0.09mm. Both ended up dropping two shim sizes while everything else dropped one shim size.
I like how the final numbers came out. All right around 0.08mm with a few at 0.10mm.